- Rod seal- DS 102
Asymmetric rod seal for standard applications as DS101, but due to design with active backup ring suitable for larger extrusion gaps or higher pressure range.
Primary use
Seal limitation
Not applicable
| min. Temp. | max. Temp. | max. Speed | max. Pressure | Material | |
|---|---|---|---|---|---|
| -20 °C | +115 °C | 0,5 m/s | max. 400 bar | HPU 94° | POM/PA/PTFEE |
| -20 °C | +115 °C | 0,5 m/s | max. 400 bar | HPU 55° D | POM/PA/PTFEE |
| -50 °C | +115 °C | 0,5 m/s | max. 400 bar | SL-PU 94° | POM/PA/PTFEE |
| -50 °C | +115 °C | 0,5 m/s | max. 400 bar | LT-PU 94° | POM/PA/PTFEE |
| min. Temp. | max. Temp. | max. Speed | max. Pressure | Material | |
| -30 °C | +110 °C | 0,5 m/s | max. 160 bar | NBR 85° | POM/PA/PTFEE |
| -20 °C | +150 °C | 0,5 m/s | max. 160 bar | H-NBR 85° | POM/PA/PTFEE |
| -20 °C | +220 °C | 0,5 m/s | max. 160 bar | FPM 82° | POM/PA/PTFEE |
| -45 °C | +130 °C | 0,5 m/s | max. 160 bar | EPDM 85° | POM/PA/PTFEE |
| -60 °C | +200 °C | 0,4 m/s | max. 160 bar | MVQ 85° | <POM/PA/PTFEE |
*Materijali
- HPU
- NBR
- H-NBR
- EPDM
- FPM
- MVQ
*Dimenzije
- L1
- L2
- ∅ d1
- ∅ D2
- ∅ D1
*Količina
- /
Nazad
ROTBAN - HYDRAULIC SEALS 
