- Piston seal- DK 102
Asymmetric piston seal for standard applications as DK101, but due to design with active backup ring suitable for higher pressure or larger extrusion gaps.
Primary use
Seal limitation
Not applicable
| min. Temp. | max. Temp. | max. Speed | max. Pressure | Material | |
|---|---|---|---|---|---|
| -20 °C | +115 °C | 0,4 m/s | max. 400 bar | HPU 94° | POM/PTFE/PEEK |
| -20 °C | +115 °C | 0,4 m/s | max. 400 bar | HPU 55° D | POM/PTFE/PEEK |
| -50 °C | +115 °C | 0,5 m/s | max. 400 bar | SL-PU 94° | POM/PTFE/PEEK |
| -50 °C | +115 °C | 0,5 m/s | max. 400 bar | LT-PU 94° | POM/PTFE/PEEK |
| min. Temp. | max. Temp. | max. Speed | max. Pressure | Material | |
| -30 °C | +110 °C | 0,5 m/s | max. 250 bar | NBR 85° | POM/PTFE/PEEK |
| -20 °C | +150 °C | 0,5 m/s | max. 250 bar | H-NBR 85° | POM/PTFE/PEEK |
| -20 °C | +220 °C | 0,5 m/s | max. 250 bar | FPM 82° | POM/PTFE/PEEK |
| -45 °C | +130 °C | 0,5 m/s | max. 250 bar | EPDM 85° | POM/PTFE/PEEK |
| -60 °C | +200 °C | 0,4 m/s | max. 250 bar | MVQ 85° | POM/PTFE/PEEK |
*Materijali
- HPU/POM
- NBR/POM
- H-NBR/POM
- EPDM/POM
- FPM/POM
*Dimenzije
- L1
- ∅ d1
- ∅ D1
*Količina
- /
Nazad
ROTBAN - HYDRAULIC SEALS 
