- Wiper - DA 118
Wiper with O-ring as preloading element. Wiping edge assures a reliable protection against penetration of dust and dirt. Additional sealing lip for reduction of residual oil fi lm if used in combination with seals type DS109. Excellent chemical and thermal resistance (depends on O-ring) with PTFEmaterial. Improved wiping, longevity and easier installation with HPU.
Primary use
Seal limitation
Not applicable
| min. Temp. | max. Temp. | max. Speed | max. Pressure | Material | |
|---|---|---|---|---|---|
| -200 °C | +200 °C | 10 m/s | PTFE pure | ||
| -200 °C | +200 °C | 10 m/s | PTFE 1 glass | ||
| -200 °C | +200 °C | 10 m/s | PTFE 2 bronze | ||
| -200 °C | +200 °C | 10 m/s | PTFE carbon | ||
| min. Temp. | max. Temp. | max. Speed | max. Pressure | Material | |
| -200 °C | +200 °C | 10 m/s | PTFE turq | ||
| -200 °C | +200 °C | 10 m/s | PTFE glass | ||
| -200 °C | +200 °C | 10 m/s | PTFE graphite | ||
| -200 °C | +200 °C | 10 m/s | PTFE ekonol | ||
| -40 °C | +130 °C | 0.5 m/s | HPU D55° | ||
*Materijali
- HPU
- NBR
- H-NBR
- EPDM
- FPM
- MVQ
*Dimenzije
- L1
- L2
- ∅ d1
- ∅ D2
- ∅ D1
*Količina
- /
Nazad
ROTBAN - HYDRAULIC SEALS 
